Why complex Boerne roof lines leak at the edges first
Custom homes around Boerne often have a dozen or more roof planes, with valleys, dormers, turrets and stone chimneys meeting the roof at odd angles. Every one of those intersections relies on flashing, and when a leak shows up it's rarely in the open field of the roof. We trace water to the step flashing, counterflashing and valley metal first, because that's where most of these homes let it in.
Stone and stucco walls add a wrinkle. Flashing has to be cut into mortar joints or tucked behind stucco correctly, and shortcuts there tend to fail after a few summers. When we rebuild these details, we'd rather open a little of the wall cladding than rely on caulk that will crack in the heat.
Gutters matter more on these homes than most owners expect. Large roof planes dump a lot of water at a few corners, and if gutters overflow there, water runs behind fascia and stains stone. We check that downspouts are sized for the area they drain and that cedar and oak debris isn't packing the valleys above them.
Is standing seam or 5V metal better for a Kendall County property?
On houses, standing seam usually wins. The fasteners are hidden, the panels move with heat, and the look suits Hill Country stone and timber. On barns, shops and simpler ranch homes, 5V crimp delivers a traditional look at lower cost, with screws that need checking every few years. Our side-by-side metal roof comparison goes into gauge, finish and cost differences.
Hail can dent either system, though dents on metal are often cosmetic rather than leaks. Ask your insurer how your policy treats cosmetic damage on metal before you choose, since some policies exclude it.
How historic stone buildings in Boerne and Comfort get reroofed
Comfort and the older blocks near Boerne's Main Street have 1800s and early 1900s stone and frame buildings, many with metal roofs that have been patched again and again. These roofs need care with the original framing, which can be uneven and spaced differently from modern lumber. Our historic roofing work matches panel profiles and colors where owners want the original look kept.
In Fair Oaks Ranch, which straddles Kendall, Bexar and Comal counties, the work shifts back to large modern homes with tile and standing seam, along with HOA standards for color and profile. We confirm those standards before ordering, since tile and metal colors are hard to swap once they arrive.
